A Guide to Data Center Backup Power
Even the slightest flaw data design could prove quite expensive. We have highlighted in the piece everything you should look at in data center power distribution. About 36 percent of data center failures occur due to power failures. Bearing in mind these are where your vital processing systems are, even the slightest power outage can be overwhelming to a business. You stand to lose a lot of work due to downtime, and you may also have to deal with dissatisfied customers when you cannot get their data, or they cannot reach you. In addition, you may lose essential data resulting from the failure. Thirty-six percent is an astonishingly great number; even with quality data center power distribution, it my still happen to you. You can’t stop a power interruption from occurring. But what one can do is to get ready for one and control your losses. In this article, we highlight some of the key things regarding data center power distribution you should understand.
Without proper vigilance, you could easily find yourself with too much or too little power for your requirements. Don’t feel rushed when finding out how much power is needed for your backup system to ensure you don’t make costly blunders. Among the biggest blunders that people normally make is deciding according to the needs on their severs’ nameplate power ratings. In most real-life cases, the servers will only utilize about 50 percent of their computer capacity at any one time. So if your backup power calculations are according to nameplate power ratings, you result in spending a lot more than what you actually require. The perfect way to go about this is to read your data center’s past power usage. Without doubt, you should go for a potent solution that provides a bit more than your past maximum usage; however, there is no need to go over the line.
A decent backup system should have a few points of failure designed into it. If not, you risk having your whole backup system fail. An excellent way out is to utilize two power distribution unis in your backup system. This will astronomically reduce the chances of your whole power system going down.
Guarantee that you carefully go through the equipment you settle for to suit your backup system. The chances are you might have a system that offers way more power than required or have a backup system that will eventually overload your uninterruptible power supply (UPS). A good way to avoid tripping your UPS, ensure you check the documentation of your servers and pick something well-matched with the existing equipment. This should be the right choice for the job.